Signal Instruments Gas Analyzers for CO, CO2, O2, NO, NOx,SO2

	Microprocessor-based Gas Analyzers with Advanced Features Auto-Start, Auto-Range Change, Range ID, Manual & Remote contact control, RS232 (AK Protocol), 4-20mA and 0-10 Volt concentration outputs, Auto-Calibration Adjustment, Programable alarms, Switchable 110/240VAC 50/60 Hz operation, CE Marked [Click the graphics to link to specific model data] Infrared Product Range Brochure
	3000HM Heated FID Total Hydrocarbon Analyzer VOC monitoring and combustion applications.	3000HM Manual
	3000HM Methane-Only FID Gas Analyzer Monitor methane in the presence of VOC/ hydrocarbons.
	4000VM Heated Vacuum Chemiluminescence NO/NO2/NOx Gas Analyzer 191° C Sampling system and 0.4µ inlet filter, Cooled PMT detector, 0-4ppm to 10,000 ppm without NO2 loss.	4000VM Manual
	7000FM Series GFC/IR Gas Analyzers for CO, CO2 or SO2 Gas Filter Correlation rotary filter system w/ Solid state detector Models for R22, Methane, Nitrous Oxide, Nitric Oxide also available	7000FM Manual
	8000M Paramagnetic Oxygen Analyzer Heated sensor to eliminate condensation and minimize drift. For dry O2 gas measurement. 0-5%, 10%, 25% auto-range.	8000M Manual
	9000MGA Multi-gas Analyzer Up to 2 gases by GFC-IR plus paramagnetic oxygen measurement. CO, CO2, NO, SO2, O2	9000MGA Manual
	Model 418 NDIR/Luft Gas Analyzer Gas-filled, dual chamber detector for highly selective detection of a single gas. CO, CO2, SO2, NO, NH3, NF3, SF6, N2O, CFCs or Hydrocarbons	418 Manual
	3030PM Portable Heated FID Total Hydrocarbon Analyzer A true, three-gas FID with the powerful microprocessor features of the 3000HM, built-in catalytic combustion air supply and zero air generator, 5m heated sample line and controller in a 15kg package. Non-Methane option is available.	3030PM Manual
	3010P MINIFID Portable Heated FID Total Hydrocarbon Analyzer A three-gas FID featuring the same detection as the 3000HM and 3030PM. Comes with a 5m heated sample line and built-in controller. Manual operation without microprocessor control. Bottle rack may be detached for use with standard, full sized gas cylinders.	3010P Manual
Remember to check out our complete line of gas sampling and analysis accessories Interested sales representatives in all regions of the U.S. should contact us.

Dual IR Gas Analyzer

Measure multiple gases by gas filter correlation plus paramagnetic oxygen measurement all in a single analyzer!

Model 9000MGA Multigas Analyser

Infrared Product Range Brochure

The Model 9000MGA is a Series III microprocessor-based gas analyzer featuring gas filter correlation infrared measurement and a paramagnetic oxygen module. Up to three gases may be measured in a single 3 RU high standard Series III instrument case.
High and low concentration analyzers employ a unique dual length optical path for drift-free, linear operation.

2 or 3 channel

Fast Response

3 Ranges per channel

RS232
AK Protocol

4-20mA & 0-10V
Chart outputs

Menu Diagnostics

2 year warranty

Available in the following
standard configurations:

CO+CO2

CO+CO2+O2

CO+NO

CO+NO+O2

HiCO+LoCO

HiCO+LoCO+O2

Consult us for
other configurations
not shown here

We are excited about getting this product. We have fielded many questions in the past and turned away countless product inquiries for high accuracy, multigas applications. This is the only multigas Gas Filter Correlation Infrared (GFC/IR) gas analyzer available anywhere. This equipment can also be outfitted with a paramagnetic oxygen module.
Based on the proven, 7000FM Series GFC/IR and Model 8000M Paramagnetic oxygen gas analyzers, the 9000MGA is a much higher quality alternative to drifty single beam IR and fuel cell oxygen multigas analyzers that are currently available.
Save yourself the trouble and disappointment of buying something that won't work properly. The 9000MGA is available now and ideally suited for combustion research / combustion analysis applications.

The standard 3-rack unit tall, Series III instrument case has up to three sets of keypads and operator displays on the front panel. Each channel may be operated seperately (as a seperate gas analyzer) and plumbing connections may be easily configured at the rear panel for this type of operation. This is a dry-basis measuring instrument so it must be used on a dry or conditioned gas stream. A series 200 gas conditioner or similar chiller is necessary for measuring raw exhaust and combustion gases directly.

Applications for the 9000MGA include:

Environmental Compliance
Combustion Research
Process Monitoring
Gas Turbine Emissions
Automotive Emissions Research

Available Ranges (per channel)

A: 100,500,1000ppm
B: 1000,5000,10000ppm
C: 1,5,10%
D: 5,10,20%
E: 20,50,100%
*Low ranges down to 0-10ppm may be specified

Models

CO / CO2
CO/ CO2 / O2
NO / CO
NO / CO / O2
CO *(LO) / CO (HI)
CO *(LO) / CO (HI) / O2

Other configurations and gas combinations available

SIGNAL USA
355 North York Rd. Willow Grove, PA 19090 Tel: 215.830.8882 Fax: 215.830.8922 Toll free: 1-866-SIGNAL-U	Hours of operation: M-F 8AM to 6PM weekends and 24-hour emergercy service by agreement email: sales@k2bw.com
© 1996-2007 SIGNAL USA Rights Reserved

	Microprocessor Control Advanced Gas Analyzers 2-Year Warranty

Signal Instruments gas analyzers are complete product line of microprocessor-based gas analyzers. Series III models are available to measure carbon monoxide (CO), carbon dioxide (CO2), oxides of nitrogen (NO, NO2, NOx), oxygen (O2), sulfur dioxide (SO2) and hydrocarbon gases (total hydrocarbon and non-methane total hydrocarbon).		Gas Analyzers